Guarding Against Corn Harvesting Accidents

  • Murphy, Dennis J.

A number of Pennsylvania farmers lose fingers, hands, arms, and even feet in corn harvesting equipment each year. Some lose their lives. Nearly all of the accidents are preventable, but risk-taking, carelessness, or lack of knowledge allow them to happen. Such tragedies can be prevented, however, especially if farm workers understand the hazards these machines present and practice the safety precautions needed to avoid them.

Most serious com harvesting accidents involve either cornpickers or corn combines. Because these machines perform similar tasks, the dangers that are related to their operation are similar, too. Burns, severe cuts, entrapment, amputations and death are hazards of both.

CORNPICKERS

Cornpickers are usually involved in most severe corn harvesting accidents, mainly because of their easily clogged gathering mechanisms. Characteristically, cornpicking accidents occur when the snapping rolls become plugged and the operator tries to remove debris or cornstalks while the machine is still running. As the operator tugs at a plugged stalk or weed, the snapping rolls may suddenly free up and begin to roll, yanking stalks or weeds forward at nearly 12 feet per second. Before the operator can release his grip, his hand and arm have traveled about three and a half feet into the machine. To make matters worse, once the person is entangled in the machine, it is often a very difficult and time consuming task to get the victim out. Fortunately, avoiding accidents like this is easy. Simply turn off the power to your cornpicker before servicing it in any way!

CORN COMBINES

The gathering mechanisms on corn combines do not become plugged as easily as those on cornpickers. Nevertheless, corn combine operators also run the risk of losing hands, arms, or feet if they try to unplug the rolls without first turning the machine off. Most combine injuries occur when clothing, fingers, hands, or legs are caught in exposed belts and gears. These accidents usually result in burns and severe cuts although amputations also occur. As with the cornpicker, shut your combine completely off to avoid injury whenever you leave the operator's platform to make adjustments. If some task must be carried out with the machine running, wear clothing that is comfortable but close-fitting. Be especially careful to avoid wearing floppy coveralls, and loose sleeves and cuffs.

Because of their size, it is dangerous to use corn harvesting equipment, particularly combines, near ditches or streams. The banks along these channels can give way under the picker or combine and upset it. As a rule, to prevent accidents of this nature, keep the center of gravity of your machine as far from the edge of a channel as the channel is deep. For instance, if the bank rises six feet from a ditch, keep at least six feet between the bank's edge and the center of your machine.

OTHER FACTORS

Another factor that affects safety during corn harvest is the weather. During the rain and cold of late fall, corn is frequently wet or icy. Wet or icy corn is more likely to clog the feeding mechanisms of both pickers and combines. Wet or icy corn is also more likely to fall over, adding to the problem of muddy and slick field conditions. This may make it difficult to stay on the corn row. If you must harvest crops under these conditions, slow your ground speed and take in less corn then you normally would. If you harvest corn early in the season, beware of hot and dry conditions.

Dry corn can catch fire and burn rapidly endangering not only you and your equipment, but your crops as well. Be alert for overheated bearings or belts and remove accumulations of chaff and stalks from near the manifold. For added safety and the ability to act quickly in an emergency, your harvesting machinery should be equipped with a fire extinguisher at all times.

Harvesting corn is a demanding task requiring constant alertness on the part of the machine operator. Due to poorly operating equipment and/or long working hours, farmers frequently become fatigued and then cannot maintain the level of awareness that is required to safely complete their task. This problem can be avoided, however, through careful planning before the harvest. For example, "downtime" can be reduced in most cases by inspecting and repairing corn harvesting equipment before harvest day arrives. And although long hours in the field are often necessary, working time can be structured in a way that will allow you to rest periodically. This can be done by setting up shifts and changing off once or twice a day if you are able to share the work with someone else, or by shutting off the machine and taking a break every couple of hours when working alone.

On corn harvesting equipment, as with all other farm vehicles, carrying extra riders is a serious hazard. Unnecessary riders not only run the risk of falling under the machinery or getting caught in exposed belts or gears, they also distract the driver and can affect his driving performance. When operating corn combines make sure no one enters the grain tank or stands near the stalk chopper when the machine is running. Occasionally children may be drawn by curiosity or a sense of adventure o the corn field where the harvesting is taking place. Therefore, always be on the lookout for children in the field ahead. The best way to prevent second party accidents, though, is to keep all individuals not involved in the harvest, especially children, far away from the corn harvesting operation.

A safe, efficient corn harvest in autumn depends a great deal upon how well you prepare for accidents. Be aware of the hazards the weather, fatigue, second parties, and embankments pose. Most of all, remember that the key factor in most corn harvesting accidents is the failure of the operator to stop the power before unclogging or servicing his equipment. Whenever you need to leave your equipment to service it, do one very important thing before you do anything else: TURN IT OFF!

Publication #: 15


This document was published in 1992 as Pennsylvania State University Fact Sheet Safety Pennsylvania Cooperative Extension Service. For more information, contact Pennsylvania State University College of Agricultural Sciences, Agricultural Engineering Department, 246 Agricultural Engineering Building, University Park, PA 16802.

Dennis J. Murphy, professor, Agricultural Engineering Department, Cooperative Extension Service, Pennsylvania State University, University Park, PA 16802.

Disclaimer and Reproduction Information: Information in NASD does not represent NIOSH policy. Information included in NASD appears by permission of the author and/or copyright holder. More

BACK TO TOP