An interactive slideshow is available for this document. Click here to begin.
The following safety module is intended to be used as a refresher safety awareness session and is in no way to be used as a substitute for job training nor proper equipment use.
You must be trained by your employer on its agricultural machinery before you operate it. Agricultural machines are comprised of many parts requiring specific training in order to operate them safely and correctly. Large machines are designed using completely different engineering principles from cars and other smaller motor vehicles. If you lack the proper training, you could find yourself in trouble very fast.
INSPECT YOUR EQUIPMENT
After you have been trained on your employer's equipment, it is important to begin your operation with a safety inspection. (See Figure 1.) This means that you need to thoroughly inspect all parts of the machine to be sure they are in good working condition. Before operating equipment, you should:
WEAR ONLY PROPER CLOTHING
No jewelry or loose-fitting clothing should be worn while operating agricultural machinery. (See Figure 2.) Machines that have revolving parts can easily entangle jewelry and baggy clothes, drawing you into the machine very quickly. Make sure shirts that have buttons are buttoned together at the cuffs and front, and clothing with zippers are zipped up.
LOOK AROUND BEFORE STARTING THE EQUIPMENT
Adjust your seat so you can easily reach all controls and see all gauges and indicator lights. After you have completed the initial safety inspection, you can turn on the power.
However, make sure that everyone is at a safe distance away from the machine before starting. (See Figure 3.) Keep your mind on your work. Most agricultural machines require your concentration in order for the process to run safely and efficiently. Do your best to avoid distractions from your work.
Never by-pass start any equipment. If the machine does not start the way it was designed, inform your supervisor.
LEAVE THE GUARDS ON THE MACHINE
If it is necessary for you to remove a safety guard, first get permission from your supervisor and make sure the machine is locked out. Replace the guards immediately when the adjustment or repair is completed. (See Figure 4.)
USE LOCKOUT/BLOCKOUT PROCEDURES
If the machine you are working with jams or gets caught up on something, turn off the power and lock it in the "off" position. (See Figure 5.) You must do this FIRST before you attempt to make any adjustments. Your employer's lockout/blockout procedure is to be followed immediately when you discover the machine to be malfunctioning. NEVER leave a machine running unattended. Never attempt to repair the machine yourself; however, inform your supervisor immediately after locking it out.
A lockout procedure simply means to put a lock on the part of the machine that controls the power to prevent it from being turned back on. Or, remove the key and take it with you. To begin a lockout procedure, turn off the power to the machine and lock the switch, valve or block with a lock and key that is only used for lockout purposes. It is VERY important that the machine is locked off and not just switched off. Many deaths and serious injuries occur each year when a machine is turned back on while another person is inside it making the necessary repair.
Use the lockout procedure whenever possible; only use the tag-out method when a lockout method is unavailable. A tag-out means using special tags that warn others of the danger of starting up the machine. A tag should have a printed warning of what could happen if the power to the machine is turned on, and must be tough enough so it can't be removed accidentally. Remember, tags alone do not prevent equipment from starting. They are only warnings. If you use a tag system, you need to be extra careful.
IF YOU FEEL ILL, STAY OFF THE MACHINE
Do not operate any machine, large or small, if you are feeling sick. (See Figure 6.) If you are not well, notify your supervisor. Illnesses and fevers can dampen your judgment and can create hazardous working conditions. It's just not worth the risk of injury.
STAY CLEAR OF UNSHIELDED MOVING PARTS
Unshielded moving parts, such as snapping or husking rolls, straw spreaders and choppers, cutterbars, discs, and feed rolls, cannot be shielded to protect you and still operate correctly. For this reason, it is important that you concentrate on your work and watch your movements and clothing around machinery. (See Figure 7.) Do not allow other people to go near unshielded moving parts, except when the machine is locked out and the person is a qualified person hired to make adjustments or repairs.
USE GOOD HOUSEKEEPING TO PREVENT ACCIDENTS
Keeping your work area and machine clean and free of clutter should become a habit for you. (See Figure 8.) Keeping walkways clear of clutter helps prevent slips and falls and also reduces the risk of fires. All platforms and access ladders or steps should be kept free from grease, dirt or debris by washing them with soap and water regularly. If you must go to the top of the machine, clean your shoes or boots of any grease with soap and water before climbing, and use the handrail as you climb. When you are on top of the machine, watch your step to prevent falling off. Never jump down from the top of the machine. Instead, use the ladder or steps.
USE HAND SIGNALS WHEN NOISE LEVEL IS HIGH
If the noise level gets too high for you to be heard correctly when you speak loudly, use hand signals. (See Figure 9.) Ask your supervisor about the hand signals that are used for your job. It is important for you to maintain constant communication with your fellow employees at all times.
NEVER PERMIT RIDERS
Do not permit riders on any moving equipment, such as tractors, forklifts, etc., even if it is for a short distance. (See Figure 10.) While moving the equipment, keep your eyes watching for bystanders who may not see you coming, and always travel at a safe, slow speed. If your machine is heavy and very large, check out your path in advance for clearances, obstructions and ditches; locate an alternate route if any are encountered. Drive with extra care if visibility is limited due to rain or fog, or if ground conditions are icy, wet or very dusty.
wear seatbelts, even if the machinery is equipped with a ROPS.
Seatbelts prevent you from being thrown from an over-turning
vehicle that could crush you from its weight.
Publication #: CA 94720
This publication is compiled from various reference sources and is designed to provide current and authoritative information on the subject matter covered. It is provided with the understanding that the publishers are not engaged in rendering medical, legal, accounting or other professional service. AgSafe, the Safety Center, Inc., and FELS believe the information provided to be correct, but assume no liability for consequential or other damages attendant to the use of this material. In no event shall the liability of AgSafe, the Safety Center, Inc., or FELS for any claim, however designated, exceed the purchase price, if any, for this publication. No claim may be maintained against AgSafe, the Safety Center, Inc., or FELS in any tribunal unless written notice of the claim is delivered to the applicable entity within 30 days of its discovery. Information about the Agsafe Project can be obtained by writing to Agsafe, 140 Warren Hall, University of California, Berkeley,
Disclaimer and Reproduction Information: Information in NASD does not represent NIOSH policy. Information included in NASD appears by permission of the author and/or copyright holder. More